Interesting Research on Kegs – What You Didn’t Know

How Does a Beer Keg Tap Work?

Whenever family and friends have a party or go out for a picnic, they usually have beer kegs available. Thirsty people need to drink a lot so the keg is really cost effective and could save money. IF you have a keg tap, this device will allow you to release the beer into your drinking cup from the keg. If you do not know how to use a keg tap, then you can waste a lot of beer, and this is why you need to be careful is using it since it is actually easy to use. You can splash foam all over you or all over your face. It is not as easy as you see people doing it.

The release of the beer is regulated by the keg tap. This uses a lever and through pulling and pressing it, the beer is released. You can get you beer when the pressure is released and it pushes the beer up to your glass. Technically, a keg tap is a switch that you can turn of or off or you can switch to open or close.

To minimize the foam it creates when pouring, place the beer keg in a steady position for a short while; the beer keg should be directly in front of you. The foam builds up when the keg is transported especially when there is too much movement. Let it stay for a while and place the keg where you plan to serve the beer to minimize the foam. Remove the cap or seal since it will be harder to tap with it. However, the pros do not remove the cap or seal because they will not put the beer at risk like you will. You need to play it safe.

Tapping with CO2 is done with portable keg systems. The keg receives pressure in a single unit pump and tap combination and this is called party pump. The beer keg tap is separated from the keg. You need to attach the pump, and the faucet must be opened to release the pressure in the keg. Pumping gives air pressure into the keg, and a push on the lever, which is the tap handle that releases beer.

A portable beer keg or a pony keg should be finished in a single because after that the beer loses its flavor when it is mixed with air. Traditional keg uses an on and off valve. By using this, you are serving by gravity, and there is no air pressure needed. When the valve is used, you simply turn to open or close the keg to get some beer.

More information: website here